Archives

Glycerin was found to be the most suitable material due to its high resistance to RF. It allows the RF to penetrate to the deep layers while protecting the epidermal layer from becoming [...]

There is no need to allow for cooling with TriPollar treatments. Pollogen has developed an electronic control mechanism that rotates between the three electrodes to prevent overheating of any one [...]

There is a possibility of enhanced heat sensation near bony areas. This is because skin is thinner adjacent to bones. However this is tolerated well by patients.

The TriPollar treatment selectively heats the fat cells in the deep and superficial adipose layers simultaneously. Heating the fat cells increases their natural metabolism, resulting in increased [...]

There is a possibility of erythema and edema appearing after the TriPollar treatment session. Typically, these symptoms are transient and will disappear within two hours. In rare cases, slight [...]

In order to obtain positive clinical results it is important to reach the optimal combination of skin temperature and exposure time – the TriPollar endpoint. Once the required temperature is [...]

Clinical trials have demonstrated average reduced tummy circumference of 4.5 cm ± 2.7; average reduced thigh circumference of 2.4 cm ±2.0; average reduced buttocks circumference of 3.1 cm ±1.7; [...]

The objective of the procedure is to reach a skin temperature of between 40 and 42 C and maintain it for the indicated exposure time. The skin temperature is monitored throughout the procedure [...]

TriPollar treatments use three or more electrodes, with the RF energy focused and centered between the three electrodes. This controls and limits the delivery of energy to the treatment area, for [...]